Instruction Manual Octopus
6
•
Never use the ironing table to support any other machine or structure.
•
It is strictly prohibited to do any kind of welding or alterations on the ironing table or
its parts.
•
It is strictly prohibited to remove any protective device/guards.
•
It is strictly prohibited to intervene in the control units/circuit boards of the Ironing
Table.
•
It is strictly forbidden to do any modification to the technical specifications of the
machine (electrical or mechanical) by third persons
.
•
Please contact your dealer or the manufacturer for any malfunction or further
information requests
3.2 Warning marks placed on the ironing table
The following attention marks are placed on each ironing table:
The operator of the system has the obligation to inform himself regarding the dangers which
may occur during usage, so that he/she can avoid them or minimize their occurrence as best
as he/she is able to.
4.
Instructions for installation
4.1
Installation
Put the ironing table in the designated area of your choice and align the machine by
increasing/decreasing the height of its feet
No 14 (see the drawing of spare parts on page
10)
. Make sure that the ironing table is stable and the ironing surface flat.
4.2
Connection to Power Supply
For the electrical connection and above all for the power supply, please follow carefully the
instructions of the electric diagram (enclosed) as well the warning signs symbols attached on
the machine. In case you have purchased a single phase machine 230V, connect the machine
onto a schuko socket 230V/16A. The connection should be done with a tripolar cable 3
Χ
1,5
mm (1 phase, 1 neutral, 1 grounded). The power should be provided with a fuse 16
Α
. If the
machine is 400V/3 phase, the connection should be made to a 5-poles cable 5
Χ
1,5 mm (3
