Installation and operating instruction
Metalight Mini
Congratulations for the purchase of primotec’s
Metalight Mini
light curing unit.
The light curing unit is delivered as shown above. Scope of supply: Metalight Mini base unit,
power cord, stainless steel drawer combined with UV-filter cover, 2 special lights (covering the
polymerisation spectrum of 320-500 nm).
For operating you need a 230 volt power outlet closed to the Metalight Mini.
Place the
Metalight Mini
on a smooth, even surface and follow these start-up instructions
carefully.
Connection to the mains supply
Connect the provided power cord with the socket
on the rear panel of the base unit and plug it into a
power outlet.
Joachim Mosch
Tannenwaldallee 4
D-61348 Bad Homburg
Fon +49 (0) 61 72 – 99 770 - 0
Fax +49 (0) 61 72 – 99 770 - 99
[email protected]
www.primogroup.de
