Starting-up
Please pay attention that the ventilation slots on the
rear panel are not covered so the cooling airstream
can reach the ventilation slots.
Place your work onto the stainless steel drawer with
its UV-filter and push it into the polymerisation
chamber.
Switch on the unit by pushing the toggle switch on the top of the unit. The electric ventilator
(fan) system starts automatically when the Metalight Mini is switched on, the ventilator (fan)
stops when the unit is switched off.
Exchange of the lights
If you want to exchange the lamps, first of all
unplug the Metalight Mini power cord from the
outlet.
Remove the lamp from its socket with a slight pull.
When ordering new lamps (your domestic dealer or
primotec, Bad Homburg) please pay attention to
the correct wave length, as there are two different
lamps installed in Metalight Mini.
Place the new lamp in the socket and push it
slightly until it locks.
If you have further questions, please call your domestic dealer or
primotec: +49 (0) 6172 99770-0
Metalight Mini
is perfect suitable for
,
Technical Data
primotec item number
ML120
mains voltage
~ 230 V / 50-60 Hz
power
max. 30 Watt
measures (lxCxh)
310x120x162
weight
1,8 kg
UV-spectrum
320-500 nm (with provided lamps)
Rev. 2.0 – 04.2006