10
BATTERY INSTALLATION
To maximize battery life, you should install a full set of 8 AA lithium (for
longest life) or alkaline batteries. The camera may also be powered by just
four batteries installed in the first (starting on the left, near the padlock
hole) slots only. Battery life will be shorter with 4 batteries, but the camera
will operate normally.
NOTE: Always set the power switch to the OFF position when installing or
removing batteries.
Please make sure the batteries are inserted correctly, as indicated inside
the battery compartment. Incorrect voltage or polarity (+/-) will damage
the camera.
Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
SD CARD INSTALLATION
Memory
Your BULLET PROOF Game Camera has a memory card slot, to accept SD
cards up to 16 GB max. capacity
(not included)
. When the SD card is full,
the camera will stop capturing images.
Inserting an SD card
• Make sure the power switch is in the
OFF
position whenever adding
or removing memory.
• Insert an SD card into the card slot completely and oriented correctly
as shown by the icon above the slot (label up, contacts facing down
and notched corner on the right).
• To remove the SD memory card, depress the SD card and pull out
the card gently.
Using a new, blank SD card is recommended. If the SD card has been
used in another device, please make sure to format it
(FAT16)
using your
computer before you set the camera to capture photos. New cards are
ready to use straight from the package.
Primos 65053 BulletProof Cam_1LIM.indd 10
12/16/14 11:46 AM