Primex XR 30 Watt, Инструкция по установке и эксплуатации

Страница: 6 / 56

l
Do not install antenna near power lines. Power lines, telephone lines, and guy wires look the same. As a precaution, please
assume any wire line can electrocute you.
l
Do not install the antenna on a wet or windy day when lighting or thunder is in the area. Do not use a metal ladder during
antenna installation.
l
Wear shoes with rubber soles and heels. Wear protective clothing including a long sleeved shirt and rubber gloves.
l
The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. These instructions are written
for qualified, experienced installation personnel, such as a Primex certified technician.
l
Antenna systems should be inspected once a year by qualified personnel to verify proper maintenance, and condition of
equipment.
Antenna Installation
l
Keep 12 in. (30.4 cm) of clearance on all sides of the enclosure.
l
High power antenna is designed for mounting above the top of a small tower or pole.
l
Best operation is obtained when the ground plane rods are above all objects.
l
In the event that metal objects extend above the level of the ground plane, or it's necessary to mount the antenna on the side of
a tower. the radiation pattern will be distorted. The shape of the pattern depends on the size of the tower and the distance
between the antenna and tower. Radiation through the tower or metal objects is lower than from other directions.
l
The antenna cannot be placed on or directly adjacent to walls or metal structures.
Guidelines for Working in Radio Frequency (RF) Environments
In accordance with Federal Communications Commissions (FCC) rules on RF emissions 47 CFR 1.1307 and OET65.
l
All personnel entering this area must be authorized.
l
Maintain a minimum of 4 ft. of clearance from the Antenna.
l
Before working on antennas, notify equipment owners and shut off appropriate Transmitters.
l
Assume all antennas are broadcasting.
6
XR 5 Watt & 30 Watt Transmitter Install & Operation Guide