PRIMEX
®
7 CW6CDC Level Controller User Manual
LEFT AND RIGHT ARROW KEYS
are used to navigate through the menu items. These
arrow keys can also be used to back out when in editing
and simulation mode.
ENTER KEY
is used for selecting a menu item for editing. This key is
also used after a value has been edited to store in memory.
UP AND DOWN ARROW KEYS
is used to increase or decrease the current value being
edited.
NOTE:
The display automatically returns to “level” after 20 seconds of
inactivity, regardless of where it was left.
Pressing once
will increment the current value by
one
unit. Pressing and
holding will begin repeatedly incrementing after a short delay. If the
operator continues to hold the key, the value continues to increment at a
faster rate.
l
SET POINTS
6 programmable set
points status LED. Form
C (SPDT)
contacts: rated at
10A at 240 VAC.
CW6CDC
l
LEVEL
DISPLAY
Eight character alpha-
numeric LED for
process value display
and program
parameters.
l
KEYPAD
Arrow keys are
used to navigate
through the
configuration and
used for adjusting
set points.
l
BAR GRAPH
20 segment bar
graph display for
process value.
Each bar
represents 5%
of full scale.
FUNCTION KEYS / DISPLAYS
