B Configuration Sheets of BIOS Setup Utility Parameters
■
Peripheral Configuration Submenu
（
）
The initial values have been unchanged.
Setting
Peripheral Configuration
Serial 1:
Auto
( )Disabled ( )Enabled ( )OS Controlled
Serial Port1 Address: *1
3F8h,IRQ 4
( )2F8h,IRQ 3 ( )3E8h,IRQ 4
( )2E8h,IRQ 3
Serial Multiplexer:
System
( )iRMC
Serial 2:
Auto
( )Disabled ( )Enabled ( )OS Controlled
Serial 2 Address: *2
2F8h,IRQ 3
( )3F8h,IRQ 4 ( )3E8h,IRQ 4
( )2E8h,IRQ 3
Parallel:
Auto
( )Disabled ( )Enabled
Parallel Mode:
Bidirection
( )Printer ( )EPP ( )ECP
Parallel Address: *3
378h,IRQ 7
( )278h,IRQ 5 ( )3BCh,IRQ 7
USB Host Controller:
Enabled
( )Disabled
USB 2.0 Host Controller:
Enabled
( )Disabled
USB BIOS Supported Devices:
Auto
( )None ( )Keyboard/Mouse ( )All
USB Boot Delay:
0s
( )3s ( )6s ( )9s
USB BIOS Hot-Plug:
Enabled
( )Disabled
> ATA Controller Config
Links to ATA Controller Config submenu
Diskette Controller:
Enabled
( )Disabled
Mouse Controller:
Auto Detect
( )Disabled ( )Enabled
Onboard Video:
Enabled
( )Disabled
LAN Controller:
Enabled
( )Disabled
LAN Remote Boot
Disabled
( )PXE
Management LAN:
Enabled
( )Disabled
*1
：
Appears when "Enabled" is selected for [Serial 1].
*2
：
Appears when "Enabled" is selected for [Serial 2].
*3
：
Appears when "Enabled" is selected for [Parallel].
■
ATA Controller Config Submenu
（
）
The initial values have been unchanged.
Setting
ATA Controller Config
S-ATA Mode:
Native
( )Compatible ( )AHCI
P-ATA Map to: *1
Secondary
( )Disabled ( )Primary
Primary IDE Channel:
Enabled
( )Disabled
Secondary IDE Channel: *1
Enabled
( )Disabled
Tertiary IDE Channel: *
２
Enabled
( )Disabled
Quaternary IDE Channel: *
２
Enabled
( )Disabled
*1
：
Appears when "Compatible" is selected for [S-ATA Mode].
*2
：
Appears when "Native","AHCI" is selected for [S-ATA Mode].
Item
Initial value
Item
Initial value
8
