B Configuration Sheets of BIOS Setup Utility Parameters
Use this form to record the settings of the BIOS Setup Utility. If you have not changed
the initial value, check the box of "The initial values have been unchanged".
The initial values in the dotted frame can be changed. If you change any setting, put
a check mark in the bracket of the ”Setting” column.
Keep the values on the gray zones unchanged.
Follow the procedure below to start the BIOS Setup Utility.
When the following message appears on the screen during POST, press the [F2] key while the
message is displayed. When POST is completed, the Main menu screen appears.
<F2> BIOS Setup/ <F12> Boot Menu
If the system starts before starting the BIOS Setup Utility, press the [Ctrl] + [Alt] + [Delete] keys
simultaneously and restart the system.
（
）
The initial values have been unchanged.
Setting
System Time:
HH:MM:SS
Displays/Sets present time.
System Date:
MM/DD/YYYY
Displays/Sets present date.
Diskette A:
1.4M
( )None ( )360K ( )1.2M ( )720K
> Standard IDE
CD-ROM
■
Links to the Standard IDE submenu
> Boot Option
■
Links to the Boot Option submenu
Base Memory:
640KB
Displays the available base memory
size below 1MB.
Extended Memory:
xxxM
Displays the memory size.
■
Standard IDE Submenu
（
）
The initial values have been unchanged.
Setting
Standard IDE: [CD-ROM]
PIO Mode:
PIO 4
Displays the PIO mode supported by
devices.
DMA Mode:
UDMA 2
Displays the DMA mode supported by
devices.
Firmware:
x.xx
Displays the firmware version.
Item
Initial value
Item
Initial value
Ｂ Configuration Sheets of BIOS
Setup Utility Parameters
Ｂ
.
１
Parameters in the Main menu
6
