PTBurn SDK
Page 31 of 53
© 2005, Primera Technology, Inc. Primera is a registered trademark and Bravo is a trademark of Primera Technology, Inc. All other trademarks
are the property of their respective companies.
Message=SHUTDOWN_IMMEDIATE
ClientID=Administrator
The ClientID should ALWAYS be fixed to “Administrator”.
4.4 Align Printer Command
** This command is only valid on the Disc Publisher PRO **
The Align Printer Command will align the printer when the system error is set to 22 or there are
no jobs on the system. If the alignment fails, the system error will be set to 31 otherwise the
system error will be set to 0. See
Appendix C
for system error codes.
Message=
ALIGN_PRINTER
ClientID=Administrator
The ClientID should ALWAYS be fixed to “Administrator”.
4.5 Ignore Ink Low Command
** This command is only valid on the Disc Publisher PRO **
The Ignore Ink Low command will ignore an ink low condition when the system error is set to 5,
6, or 7.
Message=
IGNORE_INKLOW
ClientID=Administrator
The ClientID should ALWAYS be fixed to “Administrator”.
4.6 Process Disc Command
The Process Disc Command will cause the unit to leave the wait state prior to recording the disc
and continue processing the disc. This command is only valid when LoadUnloadOverride was
set to YES in the .JRQ Job Request File.
Message=
PROCESS_DISC
DiscID=X
The DiscID should contain the id of the disc that is being processed (ie. the X value from
LoadDiscStateX = in the Status file). See
Appendix D
for an example of how to use this
message with the load/unload override functionality.
4.7 Reject Disc Command
The Reject Disc Command will cause the unit to leave one of the two wait states (prior to
recording or once recording is finished) and reject the disc. This command is only valid when
LoadUnloadOverride was set to YES in the jobs jrq file.
Message=
PROCESS_DISC
DiscID=X
