PTBurn SDK
Page 14 of 53
© 2005, Primera Technology, Inc. Primera is a registered trademark and Bravo is a trademark of Primera Technology, Inc. All other trademarks
are the property of their respective companies.
will cause PTBurn to check to see if the system ID in the PVD on the disc is set to “PTBurn” .
If the value is not found then an Invalid Media Error (Job/Disc Error 10) will be set.
2.1.31
CheckVolumeIDOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the VolumeID value in
the PVD matches the value of this key.
If the value is not found then an Invalid Media Error (Job/Disc Error 10) will be set
2.1.32
CheckPubIDOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the PublisherID value in
the PVD matches the value of this key.
If the value is not found then an Invalid Media Error (Job/Disc Error 10) will be set.
2.1.33
CheckPreparerIDOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the DataPreparerID
value in the PVD matches the value of this key.
If the value is not found then an Invalid Media Error (Job/Disc Error 10) will be set.
2.1.34
CheckAppIDOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the ApplicationID value
in the PVD matches the value of this key.
If the value is not found then an Invalid Media Error (Job/Disc Error 10) will be set.
2.1.35
PVDSystemID
This key will set the SystemID value of the PVD. This max number of characters for this key is
32.
2.1.36
PVDPublisherID
This key will set the PublisherID value of the PVD. This max number of characters for this key
is 128.
2.1.37
PVDPreparerID
This key will set the PreparerID value of the PVD. This max number of characters for this key
is 128.
2.1.38
PVDApplicationID
This key will set the ApplicationID value of the PVD. This max number of characters for this
key is 128.
2.1.39
LoadUnloadOverride
This key will enable the manual load and unload functionality.
YES
