Troubleshooting and Maintenance
41
6. Turn the ink filter tray over and set it on a table.
7. Remove the large ink pad. Replace it with the new pad.
Press the pad around the edges to completely seat the pad
in the tray. You may wish to use rubber gloves to handle
the used ink pads and filters.
8. Now remove the used filters from the printer. On the
bottom of the printer you will see three ink filters stacked
next to each other. Remove these and discard them.
9. Insert the new filters. All three should be installed together.
The longer edge should be facing down and toward the
front of the printer.
10. Replace the ink pad tray. Push down near each tab until
you hear a click. The orientation of the tray is not
important.
11. Turn the printer right side up.
INDEX
TOC
