Primera FX500E, Руководство пользователя

Страница: 30 / 40

26
Troubleshooting
LED Indicators: Power and Ready LEDs blink at the same tempo
Power LED Ready LED
ON ON
OFF OFF
Possible Problems Solutions Remarks
Media sensor cannot index
label gaps
Check the label path
Check the label sensor
If a continuous label roll
is in use, set “continuous
media” printing in driver
settings or commands
Media out Install a new label roll
Paper jam Recover the jam
LED Indicators: Power and Ready LEDs blink alternately
Power LED Ready LED
ON OFF
OFF ON
Possible Problems Solutions Remarks
Ribbon out Install a new ribbon roll Set “Direct Thermal”
printing by driver or com-
mands if no ribbon is
required.
LED Indicators: Only the Power LED blinks
Power LED Ready LED
ON ON
OFF ON
Possible Problems Solutions Remarks
Serial IO error Check serial baud rate at
both of your system and
the printer.
For serial interface only
Cutter has failed, or there
is paper jam inside the cut-
ter.
Check the cutter or
recover paper jam.
Only applicable when
cutter mode to cutter
mode.
Other possible hardware
errors.
Contact the reseller for
further service.