Primera FX500E, Руководство пользователя

Страница: 15 / 40

Hardware and Software Setup
11
5. Install the other ribbon roll and rotate it until the notches align
and lock into the left side of Ribbon Pick-up hub, and then the
right
Note: The Ribbon Pick-up Holder accepts the coated side of ribbon to be wound
ink-side IN or wound ink-side OUT.
6. Close the printer module and then press firmly at the both sides
to properly latch it until you hear a click.
7. Rotate Thumb Wheel of Ribbon Pick-up Holder to remove slack
and ribbon wrinkle, and to align the ribbon on the spindles.
Ribbon Pick-up Holder
Thumb Wheel