Primera Bravo II Скачать руководство пользователя страница 45

Страница: 45 / 60

Creating Disc on a Mac 41

•

Inner Diameter

The inner diameter refers to the size of the non-printed

center on your disc. The size of the center hub can vary

from one type of media to the next. This allows you to set

the inner diameter in millimeters allowing you to print all

the way to the center hub regardless of the type of disc you

are using. For the discs that Primera sells, use the following

guide for Inner Diameter:

−

23 mm for Primera's Tuff-Coat CDR

−

24.9 mm for the Hockey Rink Disc, Business

Card Disc and 80mm CD

•

Outer Margin

The Outer Margin refers to where the printing will cut off

around the outer edge of your disc. The size of the

printable surface can vary from one type of media to the

next. This allows you to set the outer margin in millimeters

allowing you to print all the way to the edge regardless of

the type of disc you are using.

•

Enable Low Ink Warning

The Low Ink Warning basically keeps you from printing

discs if one ore more of the colors in your ink cartridge are

running out. Your Bravo monitors the amount of ink used

when printing and will stop printing if one or more of

your colors is within 10% of being empty, and the LEDs on

the top will flash in unison. If you press the Cartridge

button on the top of the Bravo it will continue to print, but

you will want to closely monitor the discs that print. If

discoloration occurs, you are most likely out of one or

more colors and will want to change cartridges. Please

refer to section 4-F for instructions on how to change and

align ink cartridges.

•

Save As Default

The Save As Default button will save the current settings

as the system-wide defaults.

•

Restore Defaults

The Restore Defaults button will restore the driver settings

to the factory defaults.

•

Config Utility

This button launches the Configuration Utility which is

explained in detail in the pages that follow.

510873.qxd 1/25/2007 2:40 PM Page 41

Содержание Bravo II





























































Результаты поиска

Содержание Bravo II

Отзывы:

Похожие инструкции для Bravo II

Бренды по названию

Популярные бренды

Primera Bravo II, Руководство пользователя

Результаты поиска

Содержание Bravo II

Отзывы:

Похожие инструкции для Bravo II

Бренды по названию

Популярные бренды