Hardware and Cable Set-Up 3
Section 2: Hardware and Cable
Set-Up
A. CONNECTING THE PARTS AND INTERFACE CABLES
Follow these steps to integrate your ADL-100 and Laminator:
1. In the ADL-100 shipping box you will find the
Input and
Output Bins
. Place the Bins in their correct places as
shown in Figure 1.
2. Connect the
Laminator Control Cable
that was included
with your
Laminator Stand
. Insert it into the ADL-100
rear panel
6-pin mini-DIN socket
. Don't connect the other
end yet.
Figure 3: Connecting the Laminator Control Cable
3. Apply power to the ADL-100 by connecting the
Power
Supply cord
to the AD-100's rear-panel
Power Input Port
.
Don't plug the other end into a wall outlet yet.
Figure 4: Connecting Power to ADL-100
510896.qxd 4/15/2004 11:08 AM Page 3
TOC
INDEX
