
11
Connections and Setup
AIR/CABLE Y Pb Pr
L R
Antenna
AIR/CABLE Y Pb Pr
L R
CATV
AIR/CABLE Y Pb Pr DTV OUT DOLBY DIGITAL DVI OUT
(RGB) OUT (OPTICAL)
L R
Connections and Setup
This chapter tells you everything you need to know start setting up and using your PHD-200 Digital HDTV Tuner.
It includes information on Connections and Initial Settings.
Connections
This paragraph tells you connecting the PHD-200
Digital HDTV Tuner, and connects to TV, Display, the
home theater and DVI to HDMI Connection.
Connecting Air/Cable antenna
1.
Connect an outdoor or indoor Antenna directly to
this jack with a coaxial RF cable. This is to
receive analog and digital TV signals from TV
broadcasters.
)
DTV signal is 8VSB signal, which is RF
modulation format utilized by ATSC.
2.
Connect to Cable signal source using a coaxial
RF cable.
)
The PHD-200 Digital HDTV Tuner can receive
analog cable signal as well as cable DTV
signal in the event that a local cable provider is
passing 8VSB through their system. This
8VSB signal can not be encrypted by Cable
Company. And we call it
Clear QAM
signal
from cable.
Connect to HD Ready TV or HDTV Monitor
HD Ready TV is a HDTV monitor, which can accept
and display progressive video and higher resolutions
video format on the screen. HD Digital Ready TV is
typically including Plasma Display Panel (PDP) TV,
Liquid Crystal Display (LCD) TV, DLP (Digital Light
Processor) TV and High-end progressive
Projection/CRT TV or Projector.
1.
Connect antenna cable to AIR/CABLE jack of
the Digital HDTV Tuner unit. Refer to previous
section “Antenna /RF Connections”.
2.
Connect video component cable (Y-Pb-Pr cable)
from DTV OUT (Component) jack of PHD-200
Digital HDTV Tuner to your HD ready TV
component video connector inputs.
3.
Or, you can connect RGB video from DTV OUT
(RGB) jack to your HD ready TV or RGB video
monitor (for ex. like PC monitor) from VGA
connector.
4.
If your HD ready TV equips the digital DVI input,
you can connect DVI cable from DVI OUT jack to
your HD ready TV.
5.
If your HD ready TV equips the HDMI input, you
can connect DVI to HDMI cable from DVI OUT
jack of PHD-200 to your HD ready TV.
6.
Connect an audio cable from L-AUDIO-R jacks
to your HD ready TV L/R audio inputs.
)
Set DTV OUT SELECT switch to proper
position for correct video format output.