Prime Security PrimeStart 450, Руководство пользователя

Страница: 6 / 16

Operating Your PrimeStart
Remote-Controlled Door Lock/Unlock
To Lock the Doors:
Press the remote control LOCK button for 1-2 seconds. The doors will lock,
the parking lights will flash twice and the dash mounted LED will flash slowly.
If the Remote Lock Starter Disable feature was programmed ON, the vehicle
starter motor will be disabled . (See the "Programming Table for System
Features" on page 11.)
To Unlock the Doors:
Press the remote control UNLOCK button for 1-2 seconds. The doors will
unlock. The interior lights will turn on for 30 seconds or until the ignition key
is turned on. The parking lights will flash once and the dash mounted LED will
turn off. If the Remote Lock Starter Disable feature was programmed ON, it
will disengage allowing you to start the vehicle engine.
Two-Stage Unlock Capability
If the optional Two-Stage Unlock feature was installed, press the UNLOCK
button for 1-2 seconds and only the driver door will unlock. Within 3
seconds, press the UNLOCK button again and the passenger doors will unlock
(may require an optional relay).
User-Programmable Ignition-Controlled Door Lock/Unlock
For the ultimate in security and convenience, the PrimeStart can be
programmed to automatically lock your doors when the ignition key is turned
on or the engine is started, and will unlock when the ignition key is turned off.
This feature can be programmed ON or OFF. (See the "Programming Table for
System Features" on page 11.)
User-Programmable RPM Door Lock
The system can be programmed to automatically lock the doors when the
engine reaches the factory preset RPM level. (See the "Programming Table for
System Features" on page 11).
When you begin driving, your vehicle doors will automatically lock. When
you turn the ignition key off, the doors will automatically unlock.
NOTE: Ignition-Controlled Door Lock feature must be programmed OFF.
4
PrimeStart 450 Owner’s Manual