Primax CFE-11C, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 39

15
2.1.1 - Remove the emballage from the hood.
- Unscrew and remove the screws of the cover panel, on the top of the hood.
- Remove the cover panel, on the top of the hood.
2.1.2 - Place the hood over the oven, lining up the holes in the roof with holes on the sides of the hood.
Fix the hood to the external structure of the oven as follows:
PROF LINE- EASY LINE : : Fix the hood to the external structure of the oven using the 4 screws removed in step
2.1 - Positioning
- FAST LINE:
Use the 4 screws supplied with the appliance
2.1.3 - The metal clamps supplied, must be inserted to the free ends of the two Sucking metal tubes (1) of the
hood, to connect them with the two Steam vents (2) on the oven's top.
Correctly position these elements using the silicon tube (resistant to high temperatures).
For a successful connection:
- Insert the flexible element to a minimum depth of 3 cm.
- Tighten well the metal clamp
SURE SEAL WHOLE SYSTEM.