534FN
FINISH NAILER
OPERATING INSTRUCTIONS
The Primatech 534FN is a professional heavy duty pneumatic finish nailer designed to drive
standard 34° strips of 15
GA
nails in lengths of 1-1/4" (32mm) to 2-1/2" (64mm).
Read carefully these instructions before operating this tool. It is important to understand
warnings/cautions and the safety measures to ensure safe use of this tool. Additional
information is available directly from:
1135 Jérémie-Fortin,
Phone:
1 (800) 363-1962 or 1 (418) 522-7744
Québec, QC
Fax:
1 (418) 522-7466
Canada, G1J 1R8
email:
web:
support.primatech.ca
IMPORTANT SAFETY INSTRUCTIONS
There are certain applications for which this tool was designed. We strongly recommend that
this tool SHALL NOT be modified and /or used for any application other than for which it was
designed.
WARNING: When using pneumatic tools, basic safety precautions should always be followed
to reduce the risk of personal injury, including the following:
• KEEP WORKING AREA CLEAN. Cluttered areas
invite injuries.
• DON’T ALLOW CHILDREN IN THE WORKING
AREA. Don’t let them handle the tool.
• USE SAFETY GLASSES. To prevent eye injuries,
the tool operator and all persons in the working are
a must wear safety glasses with permanently
attached, rigid, plastic side shields. These safety
glasses must conform to ANSI Z87.1 requirements
(approved glasses have " Z87" printed or stamped
on them).
• USE EAR PROTECTION. The working area may
be exposed to high noise levels that can lead to
hearing damage.
