I15 Prisma Integrated Amplifier User Guide
1
These instructions help you get the best possible sound
from your I15.
Phase
The phase of the AC supply can make a significant
difference to the sound.
Use the Polarity Pen supplied with the I15 to verify which
pin is live on your AC power cable.
Ensure that the live pin of the AC power cable is
connected to the left-hand pin of the power connector,
viewed from the back panel:
Live
Burn-in
Your Primare will start to sound best after an initial burn-in
of approximately hours.
You will notice a further smaller improvement in sound
quality for at least another days’ playing.
RS232 and trigger
The RS input allows you to connect the I15 to a
controller system. Use a twisted (null modem) cable. For
more information contact Primare at [email protected] or
visit www.primare.net.
The Trigger output allows the I15 to switch on other
devices, such as a DD15.
Using the I15 with a dd15
Your I15 is an ideal companion to the Primare DD15 CD
Transport. For best results link the two products together as
follows using the two cables supplied with the I15:
to connect the trigger cable
The Trigger cable ensures that the DD15 switches on, or
to standby, when you operate the
O
button on the front
panel of the
I15.
Connect the Trigger cable from the I15 TRIG OUT to
the DD15 TRIG IN.
error messages
The following error messages on the front panel display
indicate an error condition:
dC eRROR
Try the following
Power off I15 and disconnect the speaker connections.
If this solves the problem, check the speaker wiring.
If the problem persists
Power off I15 and disconnect all input connections.
If this solves the problem, there is a DC offset on one of
the inputs.
If the problem persists
Contact your dealer for service arrangements.
OVeRHeAt
Indicates that the amplifier is overheated.
Turn off the I15 and let it rest for a few minutes.
Ensure that there is adequate ventilation around the
I15.
l
l
l
l
l
l
factory reset
Press and hold the
O
standby button on the front panel to
display the main firmware version number.
Press and hold the
O
standby button on the front panel for
10 seconds to perform a factory reset of the I15.
You can also do a factory reset from the Prisma app,
or from the
geneRAl SettIngS
menu; see
GENERAL
SETTINGS, page 15.
network troubleshooting
front panel display
The front panel display indicates the type of network
connection:
lAn
indicates that you are connected by an Ethernet
cable.
Wifi
indicates that you are connected by wireless.
network status
The
COn
indicator on the back panel indicates the
network status:
On
Indicates the I15 is connected to a network
Off
Indicates no connection to a network
flashing
indicates that the network needs to be configured
using the Google Home app.
Spotify Connect
The Spotify Software is subject to third party licenses
found here:
https://beta.developer.spotify.com/private-
documentation/esdk-third_party_licenses
ADDITIONAL INFORMATION
