Pride Ultimate 3 CF3001, Руководство пользователя

Страница: 30 / 40

30 www.pridemobility.com Ultimate
Figure 16. Front-to-rear Harness Figure 15. Battery Harnesses
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 14. Place the scooter in an area where you have sufficient clearance to move
the parts around. You need about 2 meters in all directions. You may need assistance to lift some of the scooter
components. See III. “Specifications” for individual component weights.
V I I I . D I S A S S E M B LY A N D A S S E M B LY
SEAT
REAR SHROUD
REAR SECTION
BATTERIES
BASKET
FRONT SECTION
Figure 14. The Scooter Disassembled
No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work and move around your scooter. Keep in mind that the
disassembled sections of the scooter take up more floor space than the assembled scooter.
WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for
assistance when necessary while disassembling or assembling your scooter.
1. Place the manual freewheel lever in the drive (down) position.
2. Push forward on the seat lock lever to unlock the seat; lift the seat up and off the scooter.
3. Gently pull the shroud up from the frame and lift it off of the scooter.
4. Disconnect the battery strap.
5. Unplug both black and white 2-pin battery harnesses. See figure 15.
6. Unplug the front-to-rear harness. See figure 16.
WARNING! Failure to unplug both battery harnesses and the front-to-rear harness prior to
separating the front and rear sections could result in permanent damage to the scooter.