Pride Ultimate 3 CF3001, Руководство пользователя, Страница: 29 / 40

29 Ultimate www.pridemobility.com
V I I . C O M F O R T A D J U S T M E N T S
SEATBACK ADJUSTMENT
To adjust your scooter's reclining seat, perform these
steps. See figure 11.
1. While pulling up on the seatback adjustment lever,
lean forward or rearward to adjust the seatback.
2. Release the seatback adjustment lever once the
seat is in a comfortable riding position.
ARMREST ANGLE ADJUSTMENT
The armrests of your scooter can be adjusted upward
or downward. See figure 12. By turning the
adjustment dial, the armrest will either raise or lower.
NOTE: The armrests also pivot upward to make
getting on and off of your scooter easier.
SEAT HEIGHT ADJUSTMENT
You can change the seat height to one of three posi-
tions in 2.5 cm increments. See figure 13.
Changing the seat height:
1. Turn the scooter off and place the manual free-
wheel lever in drive mode.
2. Lift the seat up and out of the seat post.
3. Loosen and remove the seat height adjustment
bolt, bolt-nut, and washers.
4. Slide the upper seat post up or down in the lower
seat post.
5. Align the adjustment holes of the upper seat post
and the lower seat post.
6. Reinstall the seat height adjustment bolt, bolt-
nut, and washers, then tighten.
7. Reinstall the shroud.
8. Reinstall and lock the seat into place.
Figure 11. Seatback Adjustment
SEATBACK ADJUSTMENT
LEVER
Figure 13. Seat Height Adjustment
LOWER SEAT POST
UPPER SEAT POST
BOLT-NUT
WASHER
SEAT HEIGHT
ADJUSTMENT BOLT
WASHER
Figure 12. Armrest Angle Adjustment
ADJUSTMENT DIAL