background image

                                                                                                                               

Quantum 1121

 29

www.pridemobility.com

V I .   B A T T E R I E S   A N D   C H A R G I N G

Why do my new batteries seem weak?

Deep-cycle batteries employ a much different chemical technology than that used in car batteries, nickel-cadmium

(nicads), or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain

down their charge, and then accept a relatively quick recharge. AGM or Gel-Cell batteries should be charged as

often as possible.  They do not have a “memory” like nickel-cadmium batteries.

We work closely with our battery manufacturer to provide a battery that best suits your power chair’s specific

demands. Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During shipping,

the batteries encounter temperature extremes that may influence initial performance. Heat robs the charge from

the battery, and cold slows the power available and extends the time needed to recharge the battery (just as with

a car battery).

It might take a few days for the temperature of the battery to stabilise and adjust to its new ambient temperature.

More importantly, it will take a few “charging cycles” (a partial drain— then a full recharge) to establish the

critical chemical balance that is essential to the battery’s peak performance and long life. It will be well worth it

to take the time to break in your battery properly.  

How can I ensure maximum battery life?

A fully charged deep-cycle battery will provide reliable performance and extended battery life. Keep your power

chair’s batteries fully charged whenever possible. Batteries that are regularly and deeply discharged, infrequently

charged, or stored without a full charge may be permanently damaged, causing unreliable power chair operation

and limited battery life.

How should I store my power chair and its batteries?

If you do not use your power chair regularly, we recommend maintaining battery vitality by charging the batteries

at least once per week.

If you do not plan on using your power chair for an extended period, fully charge the batteries prior to storage.

Disconnect the battery harnesses and store the power chair in a warm, dry environment. Avoid temperature

extremes, such as freezing and excessively hot conditions, and never attempt to charge a frozen battery. A cold or

frozen battery should be warmed for several days prior to recharging.

What about public transportation?

AGM and Gel-Cell batteries are designed for application in power chairs and other mobility vehicles, allowing

safe transportation on aircraft, buses, and trains, as there is no danger of spillage or leakage. We suggest you

contact the carrier’s ticket counter in advance to determine that carrier’s specific requirements.

What about shipping?

If you wish to use a freight company to ship your power chair to your final destination, repack your power chair

in the original shipping container and ship the batteries in separate boxes.

Содержание Quantum 1121








































Отзывы: