18
www.pridemobility.com
Pride Scooter Series
TILLER CONSOLE COMPONENTS
The tiller console houses all controls needed to drive your Travel Scooter, including the key switch, throttle control
lever, horn button, speed adjustment dial and the battery condition meter.
See figure 4
.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your Travel Scooter
until the tiller console has dried thoroughly.
I I I . Y O U R T R A V E L S C O O T E R
BATTERY CONDITION METER
HORN BUTTON
KEY (INSERTED INTO KEY SWITCH)
SPEED ADJUSTMENT DIAL
THROTTLE CONTROL LEVER
(REVERSE)
Figure 4. Tiller Console
THROTTLE CONTROL
LEVER (FORWARD)
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your Travel Scooter.
Turn the key anticlockwise to power down (turn off) your Travel Scooter.
Although the key can be left in the key switch when the Travel Scooter is powered down, we recommend remov-
ing it to prevent unauthorised use of your Travel Scooter.
WARNING! If the key is moved to the “off” position while your Travel Scooter is in motion,
the electronic brakes will engage and your Travel Scooter will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your Travel Scooter up to the
maximum speed you preset with the speed adjustment dial.
Place your right hand on the right handgrip and your left hand on the left handgrip.
Use your right thumb to push the right side of the lever to disengage your Travel Scooter’s brakes and move forward.
Release the lever and allow your Travel Scooter to come to a complete stop before pushing the other side of
the lever to move in reverse.
NOTE: When the reverse side of the throttle control lever is engaged, a back-up beeper will sound.
When the throttle is completely released, it automatically returns to the centre “stop” position and engages your
Travel Scooter’s brakes.
