background image

US Jet 3 Ultra/RevC/Jun03

                            www.pridemobility.com

5

I .   I N T R O D U C T I O N

PRIDE OWNERS CLUB

As an owner of a Pride product, you are invited to register your product's warranty and enroll in the Pride Owners Club.

You may do so by filling out and returning your enclosed product registration card or by visiting Pride's web site at

www.pridemobility.com. As a registered member, each time you visit our site, you will have access to the most interactive

and honest educational venue available today for people with mobility needs, their families, and friends.

From our home page, select "Owners Club" to enter a page dedicated to current and potential Pride product owners. You

will gain access to interviews, stories, recreation ideas, daily living tips, product and funding information, and interactive

message boards. These message boards invite you to communicate with other Pride customers as well as Pride represen-

tatives who are available to assist you with any questions or concerns you may have.

My authorized Pride Provider:

Name:______________________________________________________

Address:____________________________________________________

Phone Number:______________________________________________

Purchase Date:______________________________________________

NOTE: If you ever lose or misplace your product registration card or your copy of this manual,

contact us and we will be glad to send you a new one immediately.

Содержание Jet3 Ultra
















































Отзывы: