Pride Jet3 Ultra Скачать руководство пользователя страница 11

Страница: 11 / 47

US Jet 3 Ultra/RevC/Jun03

www.pridemobility.com

I I . S A F E T Y

Outdoor Driving Surfaces

Your power chair is designed to provide optimum stability under normal driving conditionsdry, level surfaces composed

of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you will encounter other surface

types. For this reason, your power chair is designed to perform admirably on packed soil, grass, and gravel. Feel free to

use your power chair safely on lawns and in park areas.

Reduce your power chairs speed when driving on uneven terrain and/or soft surfaces.

Avoid tall grass that can entangle the running gear.

Avoid loosely packed gravel and sand.

If you feel unsure about a driving surface, avoid that surface.

Freewheel Mode

Your power chair is equipped with two manual freewheel levers to allow for manual maneuverability by a trained attendant.

For more information about how to place your power chair into and out of freewheel mode, see IV. The Jet 3 Ultra.

WARNING! Do not use your power chair in freewheel mode without an attendant present. Personal

injury may result.

WARNING! Do not attempt to personally place your power chair in freewheel mode while seated

on it. Personal injury may result. Ask an attendant for assistance if necessary.

WARNING! Do not place your power chair in freewheel mode while on an incline. The chair could

roll uncontrollably on its own, causing personal injury.

Stationary Obstacles (Steps, Curbs, etc.)

Proceed with extreme caution when driving near raised surfaces, unprotected ledges and/or drop-offs (curbs, porches,

stairs, etc.). The correct method for approaching a curb is illustrated in figures 2 and 3.

WARNING! Do not attempt to have your power chair climb or descend an obstacle that is higher

than 2 inches unless you have the assistance of an attendant.

WARNING! Do not attempt to have your power chair proceed backward down any step, curb, or

other obstacle. This may cause the power chair to tip and cause personal injury.

Figure 2. Correct Curb Approach

Figure 3. Incorrect Curb Approach

Содержание Jet3 Ultra
















































Результаты поиска

Содержание Jet3 Ultra

Отзывы:

Похожие инструкции для Jet3 Ultra

Бренды по названию

Популярные бренды

Pride Jet3 Ultra, Руководство пользователя

Результаты поиска

Содержание Jet3 Ultra

Отзывы:

Похожие инструкции для Jet3 Ultra

Бренды по названию

Популярные бренды