Pride Mobility PATHRIDER 140 XL, Руководство пользователя

Страница: 38 / 47

38
www.pridemobility.com Pathrider 140 XL
V I I I . C A R E A N D M A I N T E N A N C E
Figure 21. Drive Wheel Removal
Figure. 22. Drive Wheel Assembly
WARNING! Completely deflate
the tyre before attempting repair!
SCREWS
REAR RIM HALF
TIRE
TUBE
FRONT RIM HALF
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tyres and
you have a flat tyre, you can have the tube replaced.
If your scooter is equipped with a solid tyre insert,
either the solid insert or the entire wheel must be
replaced depending on the model. Contact your
authorised Pride Provider for information regarding
replacement wheels for your scooter.
WARNING! Wheels on your scooter
should only be serviced/replaced by
an authorised Pride Provider or quali-
fied technician.
WARNING! Completely deflate pneu-
matic tyres before dismantling the
rim or attempting repair.
WARNING! Be sure that the key is
removed from the key switch and the
scooter is not in freewheel mode
before performing this procedure.
WARNING! When changing a pneu-
matic tyre, remove only the lug nuts,
then remove the wheel. If any further
disassembly is required, deflate the
tyre completely or it may explode.
Follow these easy steps for a quick and safe repair
for pneumatic tyres:
1. Remove the key from the key switch.
2. Elevate the side of the scooter of which you are
removing the tyre. Place wooden blocks under the
frame to elevate the scooter.
3. Completely deflate the tyre before removing the
wheel.
4. Remove the lug nuts. See figure 21.
5. Pull the wheel off of the axle.
6. Remove the screws and separate the rim halves.
See figure 22.
7. Remove the old tube from the pneumatic tyre and
replace it with a new tube.
8. Reassemble the rim halves. See figure 22.
9. Slide the wheel back onto the axle.
10. Reinstall the lug nuts and ensure they are
tightened properly.
11. Remove the blocks from beneath the scooter.
LUG NUTS