Jet1 HD/Rev H/Feb03
www.pridemobility.com
21
V . A S S E M B L Y
Figure 7. Seat-back Assembly
SCREWS
To reduce the possibility of shipping damage, your Jets seat is removed from the power base, and the seat back
is removed from the seat assembly before your Jet is shipped. The joystick may also have been removed from the
armrest. The following is a set of instructions to help you quickly and easily prepare your Jet for immediate use.
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose
control of the seat if they do so, resulting in personal injury and/or damage to the chair.
Parts List
Quantity
Seatback mounting screws
4
Knobs (arm width adjustment)
2
Expandable arm
1
Expandable arm with joystick
1
Seatback
1
8 in. wire ties
4
Seatback Assembly
The seat-back mounts to the back hinges with four (4) screws. To get to the hinges, lift up the reusable fastener
flap which covers the hinges on the back of the seat. You may install the seat-back before or after you install the
seat to the power base.
To mount the seat-back to the hinge:
1. Line up the hinges with the holes in the seat-back. See figure 7.
2. Insert the seat-back mounting screws through the hinge and into the seat-back.
3. Tighten the four screws.
