Pride Mobility Jazzy 1170 XL страница 41 Скачать руководство пользователя

Страница: 41 / 51

Jazzy 1170XL

www.pridemobility.com

V I . O P E R A T I O N

NOTE: If you turn on the power chair while it is locked and dont unlock it after one minute, the power

chair will automatically turn off itself.

Battery Condition Meter

The battery condition meter consists of six lights arranged in an arc over the battery icon. From left to right,

the first two are red, the second two are orange and the last two are green. These lights give you an accurate

indication of your usable battery capacity. If the battery has at least 85% of its rated capacity, all of the lights

will be on. As the battery voltage drops, the number of lights reduces from right to left. When the battery

capacity drops to 10% or below, all of the lights will flash once every second.

Drive Program Select Key

The drive program select key enables you to select a drive program and an actuator mode. Your Dynamic

DX controller was preprogrammed at the factory for five drive programs 1(slowest) to 5(fastest). The

drive mode is indicated by a number in the center of the keypad.

NOTE: The drive mode settings are preset at the factory. If your authorized Pride Provider changes

these settings, please make note of these changes.

To change the drive mode program:

1. Press the drive mode select key.

2. Move the joystick right to increase the drive mode program.

3. Move the joystick left to decrease the drive mode program.

4. Press the drive mode select key.

Drive Mode and Actuator Display (also Remote Status Display)

This is a seven-segment light that displays the drive program. It also displays a drive inhibit and actuator

mode (if applicable), when they occur.

Actuator Select Keys with Lights

If your power chair is equipped with power accessories such as a power seat or power elevating leg rests,

you can operate them through the remote keypad. Contact your authorized Pride Provider for information

on how to operate these accessories.

Remote Status Light

This light will flash if there is an internal Dynamic DX Remote fault, or if an OONAPU fault has occurred.

See Out Of Neutral At Power Up.

Horn Key

The horn key activates the horn.

Battery Saver Feature

When the battery capacity drops to below 21V (typically two lights), the controller will reduce power chair

performance to conserve battery power.

Содержание Jazzy 1170 XL




















































Результаты поиска

Содержание Jazzy 1170 XL

Отзывы:

Похожие инструкции для Jazzy 1170 XL

Бренды по названию

Популярные бренды

Pride Mobility Jazzy 1170 XL, Руководство пользователя

Результаты поиска

Содержание Jazzy 1170 XL

Отзывы:

Похожие инструкции для Jazzy 1170 XL

Бренды по названию

Популярные бренды