Pride Mobility Jazzy 1170 XL страница 32 Скачать руководство пользователя

Страница: 32 / 51

www.pridemobility.com

Jazzy 1170XL

V I . O P E R A T I O N

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:

1. With the VSI switched on, press and hold the on/off button. After 1 second, the VSI should beep.

2. Release the on/off button.

3. Push the joystick to the full forward position until the VSI beeps.

4. Pull the joystick to the full rearward position until the VSI beeps.

5. Release the joystick. There should be a long beep.

6. The VSI is now locked.

To unlock the VSI:

1. Press the on/off button and power on the VSI. The maximum speed/profile indicator should ripple side

to side.

2. Push the joystick to the full forward position until the VSI beeps.

3. Pull the joystick to the full rearward position until the VSI beeps.

4. Release the joystick. There should be a long beep.

5. The VSI is not unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Off-board Charger/Programming Socket

You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the

front of the VSI. If you use an off-board charger, the charger current should not exceed 12 amps. Contact

your authorized Pride Provider for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the onboard

charger/programming socket. See your authorized Pride Provider for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact your authorized Pride Pro-

vider for more information.

Actuator Connector

The actuator connector connects the VSI to optional powered systems such as an elevating seat or lighting

system. Contact your authorized Pride Provider for information on how to operate these accessories.

Controller Connector

This connects the VSI to the power chairs batteries, motors, and motor brakes.

Charger Inhibit Connector

This connects the VSI to the onboard battery charger. This connection provides an inhibit that disables the

VSI when the battery charger is on. The charger inhibit connector is coded with colored dots. The dots are

positioned so that you align the flat side of the male connector with the flat side of the female connector

before making the connection.

WARNING! Failure to properly align the connectors can result in damage to the VSI, the

charger, and the connectors.

Содержание Jazzy 1170 XL




















































Результаты поиска

Содержание Jazzy 1170 XL

Отзывы:

Похожие инструкции для Jazzy 1170 XL

Бренды по названию

Популярные бренды

Pride Mobility Jazzy 1170 XL, Руководство пользователя

Результаты поиска

Содержание Jazzy 1170 XL

Отзывы:

Похожие инструкции для Jazzy 1170 XL

Бренды по названию

Популярные бренды