Pride Mobility Jazzy 1100, Руководство пользователя

Страница: 37 / 60

Jazzy 1100/RevJ/Feb03 www.pridemobility.com 37
DX CONTROLLER
The Dynamic DX electronic control system is a modular system. The electronics necessary to operate the
power chair are contained in several modules located on different parts of your power chair.
The Dynamic DX system consists of the following components:
n master remote (Europa)
n communications cable(s)
n power module
n motor wiring harnesses
n battery wiring harnesses
n actuator lighting module (for optional systems)
The master remote is located typically on the end
of an armrest. The other components are located
inside the power base.
Europa Master Remote
The Europa master remote consists of the following
(see figure 36):
1. joystick
2. keypad
3. controller communications connector
4. off-board charger/programming socket
Joystick
The joystick controls the direction and speed of the power chair. When you move the joystick from the
neutral (center) position, the electromagnetic brake will release and allow the power chair to move. The
further you push the joystick from its neutral position, the faster your power chair will move. When you
release the joystick and allow it to return to the neutral position, you engage the electromagnetic brake.
This helps the power chair decelerate and come to a complete stop. You can also use the joystick control
power actuators.
WARNING! If your power chair begins to move in an unexpected manner, immediately release the
joystick. Unless the joystick is damaged, this action should stop your power chair.
Out Of Neutral At Power Up
Your power chair joystick is equipped with Out Of Neutral At Power Up (OONAPU). If you power up the
system and the joystick is not in the neutral position, the system status ligjt flashes rapidly for either as
long as the joystick is out of the neutral position or five seconds. If this has happened and the all the
segments on the battery condition meter are flashing, you may have set a fault code. See “Fault Codes.”
Keypad
The keypad is located directly in front of the joystick. It contains keys that you will use to control your
power chair. See figure 37.
Figure 36. Europa Master Remote
1/0 1/0
1
2
3
4