Installation
Handling Prior to Installation
• Avoid introducing contaminants into the unit.
• When handling the unit, we recommend wearing
clean, white cotton gloves to avoid smudging.
• Store the units in a covered, dry location while
waiting for installation. Location should be
cleaned of excess dust before installation.
Pre-Installation Review
Read manual in its entirety before installation. Determine
where the beams should be located. The beam construction
determines the beam performance. Ensure the following match
the beam schedule:
• Length
• Nozzle size
• Number of pipe connections
• Coil handing
• Coil circuiting
• Inlet size and location
Unit Installation
STEP 1 – INSTALL BLOCKING
ACBC active beams come standard with mounting brackets
that utilize blocking to secure the beam to the wall. The
location of the mounting brackets is shown on page 3.
Secure blocking that runs across the wall at the height of the
beam mounting brackets. The blocking should be securely
fastened to the stud wall or similar structure. Blocking and
fasteners are by others. Please see Figure 2.
It is recommended to perform a dry fit installation at this stage
to ensure blocking and mounting bracket alignment. Remove
the face of the beam using a 4mm hex key for the ¼ turn
latches and set aside on a clean, flat surface to avoid damage.
Place beam in desired location against the wall and blocking
and verify proper alignment. The ACBC can then be removed
for installation of the water headers in between the blocking.
NOTE:
Multiple ACBC can be installed continuously along
a wall. All units should be dry fit together to ensure proper
alignment and location of inlet and water. If piping and air
connections require additional space between wall and chilled
beam, consider using flashing pieces to cover gap. Flashing
pieces by others.
FIGURE 1: MOUNTING BRACKETS
FIGURE 2: UNIT ALIGNMENT
ACBC 1-WAY
WALL MOUNTING
BRACKETS
ACBC 2-WAY
WALL MOUNTING
BRACKETS
FLOOR MOUNTED ACTIVE BEAM
INSTALLATION & MOUNTING INSTRUCTIONS
5
www.priceindustries.com | FLOOR MOUNTED ACTIVE BEAM - Manual
