Step 5:
Remove the two screws from
the back panel then secure it to the
bookshelf, pictured in Figure 12. Do not
discard screws.
Step 6:
Place hands in both slots in
the back panel and lift straight up 1.5
in. and rotate the bottom part of the
panel towards you and remove the
back panel, reference Figure 12. Do not
discard back panel and place on a clean
and flat surface.
Step 7:
Locate top mounting bracket
holes on bookshelf and secure to the
wood blocking with screws by others,
pictured in Figure 13.
Step 8:
Repeat step 7 for bottom
mounting brackets pictured in Figure 13.
Step 9:
Place back panel flanges into
slots while the top of the back panel is
rotated towards you and as you insert
the flanges slowly rotate the top towards
the wall until the panel is in its original
position, reference Figure 14.
FIGURE 12
FIGURE 13
FIGURE 14
ROTATE
FRONT OF UNIT
PLACE HAND
HERE
REMOVE X2
SECURE
TO WOOD
TOP
MOUNTING
BOTTOM
MOUNTING
PLACE TABS INTO SLOTS
ROTATE
FLOOR MOUNTED ACTIVE BEAM
INSTALLATION & MOUNTING INSTRUCTIONS
22
FLOOR MOUNTED ACTIVE BEAM - Manual | www.priceindustries.com
