PRG MBOX DIRECTOR, Руководство пользователя

Страница: 68 / 120

62 MBOX
®
DIRECTOR USER MANUAL
24-Hour Clock
Scenes can be played back using a 24-hour clock. In this case, the playhead will always follow the current time of day
during playback. If a longitude and latitude are entered, scene times can also be relative to the local sunset and
sunrise.
To enable the 24-Hour Clock, it must be selected as the Timecode Source at the General Preferences window. (Refer
to
"General Preferences" on page 24.)
To configure scene times relative to the local sunset/sunrise, a "sunset" or "sunrise" prefix should be added to the
timecode entry. For example:
+ "sunset-00:30:00:00" will recall the scene 30 minutes before sunset.
+
"06:00:00:00" will recall the scene 6 hours after sunset.
To enable 24-hour clock with sunrise/sunset:
Step 1. Open Preferences window and select General tab. (Refer to "General Preferences" on page 24.)
Step 2. Click Timecode Source pop-up and select "24 Hour Clock" from list.
Step 3. At new window, enter local latitude and longitude values.
Step 4. At Scene List, click in timecode field for a scene.
Step 5. Type in one of the following:
sunset-
sunrise-
Step 6. Enter offset from sunrise/sunset using the typical HH:MM:SS:FF format.