EN
Prexiso P40A
6
Technical Data
*
The typical measurement uncertainty of ± 3 mm
is valid for measurements on white, diffusive,
reflective targets up to 5 m at low ambient light
and moderate temperatures. For distances
greater than 5 m, the measurement uncertainty
could increase additionally by 0.1 mm/m. In
unfavourable conditions (such as bright sunlight,
targets with poor reflectivity, or high or low
temperatures) the measurement uncertainty
could further increase up to ± 8 mm for distances
below 5 m and additionally by roughly 0.15
mm/m for distances greater than 5 m.
Error, faults & troubleshooting Care
• Clean the device with a damp, soft cloth.
• Never immerse the device in water.
• Never use aggressive cleaning agents or
solvents.
Disposal
CAUTION
The battery must not be disposed of
with household waste. Care for the
environment and take them to the
collection points provided in
accordance with national or local
regulations.The product must not be
disposed with household waste.
Dispose of the
product appropriately in
accordance with the national
regulations in force in your country.
Adhere to the national and country
specific regulations. Product specific
treatment and waste management
can be downloaded from our
homepage.
General
Maximum
measuring range*
Measuring accuracy*
Measuring units
Laser class
Laser type
Autom. power switch-off
Autom. laser off
Battery durability
(2 x AAA)
Dimension(LxWxH)
Weight (without batteries)
Operation Temperature
Storage Temperature
1-135ft / 0.30-40m
(measure from top side)
± 1/8 in
± 3 mm
ft+inch/m/ft/inch
2
620nm - 690nm
120s
30s
up to 3000
measurements
6.1 x 0.91x0.71 in
155x23x18 mm
1.41oz / 40g
32 to 104 °F
0 to 40 °C
14 to 140 °F
-10 to 60 °C
Faults
Cause
Solution
IC401
IC201
IC303
IC102
IC505
Change batteries
Change to a darker
environment for test
Improve the reflective surface.
(Use target plate, white paper)
Measuring the distance within
measurement range.
Improve the reflective surface.
(Use target plate, or don't
aim at strong light)
Switch on / off the device,
if the symbol still appears
after several times, please
contact with your dealer.
Low battery
The environment
is too bright
Received signal too
weak or Out of
measuring range
Received signal too
strong
Hardware error
