www.preval.com
Page 6
inTroducinG Preval:
tinyurl.com/vfan-intro
SPecificaTionS:
•
20 PSI @ 5 CFM
•
Dual action
•
Head size: .9 mm (comes with the
aircaps) .66 mm and .38 mm available
•
Hairline detail to 3-inch fan pattern
•
Hybrid system — allows for multiple
power sources, including our compressor
•
No electric compressor needed, but
compatible with 1/4 inch threaded intake.
The world’s first hybrid, high performance touch-up system.
airbruSh oPeraTion:
1. Press down on the trigger to control air and pull back on the trigger to control
quantity of paint flow.
See video at:
tinyurl.com/vfan-howtopaint
2. The airbrush comes with a fan aircap. Test spray on a piece of scrap. Hold
the airbrush 6" away from the surface to achieve a 3" fan pattern.
See video at:
tinyurl.com/vfan-fanaircap
3. Switching aircap is as easy as screwing the fan aircap off and replacing it with
the standard aircap. Make sure there is a snug fit and there are no air leaks.
See video at:
tinyurl.com/vfan-precisionaircap
4. Speed of movement controls density of color and fading effects at beginning
and end of strokes.
5. For fine detail, hold the airbrush very close to the surface, push down for air
and pull back very slowly on the trigger to release a small amount of paint.
See video at:
tinyurl.com/vfan-hairlinespray
6. For background work and broad effects, hold the airbrush away from the work
surface and pull back on trigger to release required amount of color.
7. For stippling, remove the aircap, push down on the trigger and pump the
trigger forward and back. Adjust the air pressure to between 15 and 65 PSI
for desired stipple effect.
8. For cleaning and replacing parts
see full disassembly at:
tinyurl.com/vfan-disassemble
9. For more information visit
www.preval.com
and visit the FAQ section.
M
