PRETUL 27098, Руководство пользователя, Страница: 10 / 28

10
Start Up
ENGLISH
Cutting Guide Adjustment
Blade Replacement
Maintenance
To keep the work piece width fixed when making cuts use the
cutting guide.
To adjust width, loosen the knob (
A
) and run the cutting guide
into the desired position.
Do not use abrasive discs.
Cutting Indicator
The front of the base has a cut line indicator for vertical and
bevel cuts. This indicator allows you to guide the saw along
the line drawn on the work material.
A
When the cutting discs wear out, replace them
immediately
The cutting discs’ size specified for this
tool are 7-1/4” Never use a cutting disc of different type or
size. Otherwise it can cause severe personal injury or
damage the tool permanently and making the warranty
void.
Never use damaged or incorrect washers or bolts for
discs. To get excellent and safe operation the washers and
bolts included are specially designed for this model of
tool.
Use cutting discs with an arbor hole of the right size and
shape. Otherwise the disc may start rotating eccentrically
causing loss of control.
1. Unplug the tool and adjust the cutting depth to the
lowest setting. (See page 8).
2. Open the retractile guard all the way ( A ) and keep it in
that position.
3. Place the wrench ( F ) on the allen screw ( E ) and hold
down the shaft lock button (
D
).
Turn the screw counterclockwise. The cutting wheel will
rotate at the same time as the
bolt, until the axle is fully locked when the locking button
fully engages.
4. Loosen and remove the screw, remove the washer ( C )
and the disc. Release the spindle lock button.
5. Fit the new blade disc ( B ). Make sure that the direction
of the arrow printed on the disk matches that of the arrow
engraved on the tool guard.
6.
Place washer (
C
) on disc and insert screw (
E
).
7. Press the spindle lock button again. Tighten the screw
with the wrench (
F
) clockwise, once the disc is secure,
release the spindle lock button.
WARNING
Only clean, sharp and perfectly set blades can
guarantee a good cut. Keep handy extra cutting
discs to have sharp blades always available
D
A
B
C
E
F
G