9
Experiencing
Reason
What to Do
Device ON/OFF LED Indi-
cator Light is not on
Adaptor not connected to
power socket on device
or wall outlet
Check power connections
LED Light on without Oxy-
genated Mist Flow
Water Tank is empty
Fill water tank
Oxygenated Mist
has a slight odor
New device or not fresh
water
A new device after a
few uses will correct
this– or change water in
Water Tank & Reservoir
located at base where
Water Tank fits into
device (use Distilled
or fresh tap water)
Oxygenated
Mist Flow output
is low
Dirt on Atomizing Disc or
too little water in Water
Tank and in Reservoir
Clean Atomizing element
in Reservoir, refill water
level (use Distilled or
fresh tap water)
Abnormal Noise
Low water level in Water
Tank or Reservoir, device
not on flat surface
Refill to proper level in
water in based unit
(use Distilled or fresh tap
water), place base unit
on flat surface
Turned ON Oxygenated
Mist Flow Knob and no
flow is activated
Water Tank is empty
Fill Water Tank
Trouble shooting
