Prestigio Signore 152, Техническое и сервисное руководство

Страница: 46 / 124

Type the Hard Disk Password (a symbol appears for each character you type) and press
e
to use the
computer. If you enter the password incorrectly, an x symbol appears. Try again and press
e
.
You have three chances to enter a password. If you successfully entered the password, the system starts
Windows.
Removing a Password
If you fail to enter the password correctly after three tries, the system hangs.
To change a password, follow the same steps used to set a password.
1. Use the cursor
w
/
y
keys to highlight a Password parameter (Supervisor Password, User Password,
Password on boot ) and press
e
. The following prompt appears:
2. Type Current Password, leave the “ Enter New Password” blank, and then type “ Confirm New Password”.
Press
e
, the password is removed.
Removing a HDD Password
If you fail to enter a HDD password correctly after three tries, the system will be disabled.
To change a password, follow the same steps used to set a password.
1. After three tries, a prompt appears: (for example, if the primary master HDD is locked.)
2. Enter the BIOS utility to check HDD’s serial number and write it down.
3. Use another computer to generate the HDD Password with hddmas.exe or mashdd2.exe . Type the
HDD’s serial number, press
e
, HDD password will be generated.
4. Type the generated HDD password in the following prompt you set up.
Enter Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
Enter Primary Master HDD Master Password [ ]
Enter Primary Master HDD Master Password [ ]
TECHNICAL SERVICE MANUAL Prestigio Signore 152
38