Prestigio Signore 152, Техническое и сервисное руководство

Страница: 42 / 124

OnBoard Device Configuration
The parameters in this screen are for advanced users only. You do not need to change the values in this
screen because these values are already optimized.
The Onboard Device Configuration screen assigns resources to basic computer communication hardware.
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter Description Options
Serial Port Enables or disables the serial port.
The serial port is a PnP device. Enabled/Disabled
setting won’t affect the Windows Device Manager
setting of the serial port.
Base I/O address: Set the base I/O address of the
serial port.
Help: Set the I/O address for the serial port A.
Interrupt: Set the IRQ of the serial port.
Help: Set the IRQ for the serial port A.
Enabled or Disabled
3F8 , 2F8, 3E8 or 2E8
4 or 3
PhoenixBIOS Setup Utility
Advanced
Serial port [Enabled]
Base I/O address: [3F8]
Interrupt: [IRQ4]
Parallel port: [Enabled]
Mode: [ECP]
Base I/O address: [378]
Interrupt: [IRQ7]
DMA channel: [DMA3]
Item Specific Help
F1 Help ÏÐ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ÍÎ Select Menu Enter Select Sub-Menu F10 Save and Exit
¡¿
Configure serial port using
options:
[Disabled]
No configuration
[Enabled]
User configuration
OnBoard Device Configuration
PhoenixBIOS Setup Utility
Advanced
Serial port [Enabled]
Base I/O address: [3F8]
Interrupt: [IRQ4]
Parallel port: [Enabled]
Mode: [ECP]
Base I/O address: [378]
Interrupt: [IRQ7]
DMA channel: [DMA3]
Item Specific Help
F1 Help ÏÐ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ÍÎ Select Menu Enter Select Sub-Menu F10 Save and Exit
¡¿
Configure serial port using
options:
[Disabled]
No configuration
[Enabled]
User configuration
OnBoard Device Configuration
TECHNICAL SERVICE MANUAL Prestigio Signore 152
34