Prestigio Signore 152, Техническое и сервисное руководство

Страница: 43 / 124

System Security
The System Security screen contains parameters that help safeguard and protect your computer from
unauthorized use.
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parallel Port Enables or disable the parallel port.
The parallel port is a PnP device. Enabled/Disabled
setting won’t affect the Windows Device Manager
setting of the parallel port.
Help: [Enabled]=User Configuration
[Disabled]=No Configuration
Mode: Set the mode for the parallel port using options.
If operation mode is set to ECP DMA Channel, sets
the direct memory access (DMA) channel for the
printer to operate in ECP mode. This parameter is
enabled only if operation mode is set to ECP.
Base I/O address: If operation mode is set to Base I/O
address, sets the base I/O address of the parallel port.
Interrupt: If operation mode is set to interrupt, sets the
interrupt request of the parallel port.
DMA Channel: Set a DMA channel for the printer to
operate in ECP mode. This parameter is enabled only
if the operation mode is set to ECP. Sets the DMA
channel for the parallel port.
Enabled or Disabled
1 or 3
ECP, Bi-directional, EPP, or
Output only
378 , 3BC, or 278
7 or 5
DMA 3 or DMA 1
Parameter Description Options
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Set Supervisor Password [Enter]
Set User Password
[ Enter ]
Password on boot: [ Disabled ]
Set Primary Hard Disk Password [Enter]
Item Specific Help
F1 Help
ÏÐ
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
ÍÎ
Select Menu Enter Select Sub-Menu F10 Save and Exit
¡¿
Supervisor Password controls
access to the setup utility.
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Set Supervisor Password [Enter]
Set User Password
[ Enter ]
Password on boot: [ Disabled ]
Set Primary Hard Disk Password [Enter]
Item Specific Help
F1 Help
ÏÐ
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
ÍÎ
Select Menu Enter Select Sub-Menu F10 Save and Exit
¡¿
Supervisor Password controls
access to the setup utility.
TECHNICAL SERVICE MANUAL Prestigio Signore 152
35