Backlight
z
Tap
on
on submenu to
enter backlight setting.
z
Tap
on
/
to adjust backlight
brightness.
z
Tap
on
/
to cancel /
confirm.
Calibrator
z
Tap
on
Calibration
icon on submenu
to enter the screen calibrating menu.
z
Tap the center of “+” as it moves
around the screen. Tap the screen as
instructed after “+” has moved through
a cycle (Center
→
Top left corner
→
bottom left corner
→
bottom right
corner
→
top right corner).
Settings
Take steps described in the tables below to solve simple problems before contacting
customer service.
NOTE:
Immediately turn off the device and disconnect the power adapter if the
device is not working properly. Never try to repair the unit without
authorized professionals for it may damage the unit.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
There is no
sound.
The volume may be turned
down or mute.
Turn up the volume or turn
on the sound output.
Users can’t turn
on the unit.
The adaptor doesn’t
connect well.
Connect the adaptor
correctly.
The built-in rechargeable
battery is weak.
Use the adaptor to supply
power or charge the
battery.
There is no
picture.
The brightness may be
turned down.
Adjust the brightness of the
LCD.
The unit can’t
receive satellite
signals or can’t
orient.
The unit may be obstructed
by buildings or metal block.
Make sure to use the unit
out of room; if in the
vehicle, you can use the
external GPS antenna to
solve this problem.
EN
EN - 13
