17
IR TRANSFER(IR PASS)
1. Currently the camera support NEC code format. For customized with other codes, pls contact us.
2. Once the camera finish power configuration, enable the IR transfer function via sending COM command.
3. Get the targeted remote controller point to the camera IR receiver, press keys on the remote controller, then the
camera will output the received IR code via VISCA IN port.
4. IR Transfer output format: XX XX XX XX FF
5. The camera can save all setting, no need to re-set after power circle.
OSD MENU
1.under working mode, press the menu button
on the IR remote, to enter the OSD menu ; press the menu
butoon again to exit and save modified parameters.
2.Use the navigate button to select the main menu. As above picture, once been selected, the main menu will
change to grey color background, and the right side will show all parameters under this sub menu :
3.In the second grade menu, press the up/down navigate button to select the sub menu, use left/right navigate
button to set the parameter;
4. Select the last option
“
return
”
and press the right navigate button to get back to previous menu;
5. Press OSD button
again to exit the menu.
XX XX XX XX: Remote Controller Code
FF: End Code
