9
IR REMOTE CONTROLLER
LED Function Instruction
Press any button and shows in red color: Current selection is to control the camera;
Press any button and shows in green color: Current selection is to control the codec;
Press any button and shows in blue color: Current selection is to control the TV;
Power button
Red button
: in normal work mode, short press one time, camera will enter standby
mode; short press again, the camera will start self-configuration and go to HOME
position; it will go to No.0 preset position if that was set;
Green button:
Codec power button(need to learn the button coding);
Blue button:
TV power button( need to learn the button coding);
Focus (Left): +/-
Manual focus, only valid under manual focus model;
Zoom (Right): +/-
Control the lens zoom rate;
Navigate : Up/Down/Left/Right
In normal working mode, use navigate key to control pan/tilt;
Confirm/Home button:
In normal working mode, short press to let the camera go back to Home position.
Menu button:
show the camera version
Number buttons
Set Preset:
Long press(3seconds) the number button to save preset;
Clear Preset:
Clear+number button to clear the relative preset;
Long press(3seconds) the Clear button to clear all preset;
Run Preset:
Short press the number button to run the relative preset.
