manualshive.com logo in svg

PRESONUS STUDIOLIVE 24.4.2, Руководство пользователя, Страница: 71 / 200

Поделиться
Скачать
PRESONUS STUDIOLIVE 24.4.2 Скачать руководство пользователя страница 71

65

65

Owner’s Manual

Quick S

tar

t:

Lev

el

Setting

Ov

er

view

Hook

up

Con

trols

Tut

orials

Technic

al

Inf

orma

tion

Trouble

-

shooting

and W

arr

an

ty

Sc

enes

, P

resets

, S

yst

em Menu

,

and MIDI C

on

trol

Sof

tw

ar

e: Univ

ersal C

on

trol

, 

SL Remot

e, C

aptur

e, 

and S

tudio O

ne A

rtist

 

Connecting to a Computer 

6

Connec

ting

to

 a

Comput

er

 

Using the StudioLive as an Audio Interface  6.4

Cakewalk Sonar 6+

1.  Launch Sonar.
2.  Go to Options | Audio... and click on the Advanced tab.
3.  Change the Driver Mode to “ASIO.”
4.  Click the “OK” button.
5.  Restart Sonar.
6.  Go to Options | Audio... and click on the Drivers tab.
7.  Highlight all input and output drivers beginning with “PreSonus FireStudio.”
8.  Go to Options | Audio... and click on the General tab.
9.  Set the Playback Timing Master to “PreSonus FireStudio ... DAW Out 1.”
10.  Set the Recording Timing Master to “PreSonus FireStudio ... Mic/Inst 1.”

Ableton Live 5+

1.  Launch 

Ableton Live

2.  Go to 

Options | Preferences | Audio

3.  Choose  

Driver Type: Asio    |   Audio Device: ASIO PreSonus FireStudio

4.  Go to 

Input Config : Enable

 and select the desired Input channels.

5.  Go to 

Output Config : Enable

 and select the desired Output channels.

6.  You may now select the StudioLive’s inputs and 

outputs for each track created in Live.

6.4.2 

FireWire Sends and Returns

When using the StudioLive as an audio interface, it is important to understand 
the terms “FireWire send” and “FireWire return.” Because the audio interface in 
the StudioLive is completely integrated with the other functions of the mixer, the 
FireWire I/O is designed to work as an independent bus. You can route (send) signals 
from other buses to the FireWire bus, and its output (return) signal is hard-coded to 
designated mixer channels. Your StudioLive has 32 available sends and 26 returns.

FireWire sends 1 through 24 are hard-coded to be sent pre-fader from the 24 input 
channels of the StudioLive. These sends can be pre- or post-Fat Channel EQ and 
dynamics. To record the EQ and dynamics processing on any channel, simply enable 
the Dig Out button. It will illuminate, indicating that the Fat Channel signal path is 
being routed to the FireWire send. If this mode is not enabled, the signal sent via 
FireWire will be post-trim and post-analog insert (if applicable). As discussed in 
Section 4.5.1, the Dig Out button is not operable for the subgroups, main outputs, 
aux bus, internal FX returns, and aux inputs. The subgroups, main outputs, and aux 
inputs are also sent post-fader to their FireWire sends. 

Содержание STUDIOLIVE 24.4.2









































































































































































































Отзывы:

Нет отзывов