manualshive.com logo in svg

PRESONUS STUDIOLIVE 24.4.2, Руководство пользователя, Страница: 44 / 200

Поделиться
Скачать
PRESONUS STUDIOLIVE 24.4.2 Скачать руководство пользователя страница 44

38

38

PreSonus StudioLive

™

 24.4.2

Quick S
tar

t:

Lev

el

Setting

Ov

er

view

Hook
up

Connec

ting

to

 a

Comput

er

Tut

orials

Technic

al

Inf

orma
tion

Trouble
-

shooting

and W

arr

an

ty

Scenes
, P

resets
, S

yst

em Menu

,

and MIDI C

on

trol

Sof

tw

ar

e: Univ

ersal C

on

trol

, 

SL Remot

e, C

aptur
e, 

and S

tudio O

ne A
rtist

4 Controls

Con

trols

38

4.4  Aux and FX Buses

4.4 

Aux and FX Buses

The StudioLive has ten analog aux buses and two internal effects buses. The aux 
buses are mono; however, two aux buses can be linked to create a stereo bus. 
Section 8.5 discusses how to use these aux buses for monitor and effects mixing.

 

4.4.1 

Analog Aux Send Controls

Solo Button

Turns Soloing On and Off.

This button will solo the aux bus to the main outputs or to the monitor outputs. Only 

PFL soloing is available for the aux buses.

When a Solo button is enabled, that channel or bus will automatically 
be selected, and its Select button will illuminate.

Post-Fader Send Button

Enables and Disables the Post-Fader Send.

When this button is enabled, the send levels to that aux bus will be post-Fat Channel 

and post-fader, and therefore are affected by fader settings. If the button is disabled, 
by default, the aux buses use the Pre 1 setting, so that all channels on your StudioLive 
are sent to the aux bus after the phase-reverse switch, high-pass filter, and noise gate 
but before the compressor, EQ, limiter, and fader. However, in the System Menu, you 
can select the Pre 2 setting, which makes the send occur after all Fat Channel 
processing but before the fader. Please review Section 5.4 for details.

Output Level Control

Adjusts the Master Level of the Aux Output.

This knob controls the overall output level of the aux mix. 

 
 

Aux Send Select Button

Enables Fat Channel Viewing.

As previously described in section 4.1.1, the Select button routes its aux bus through 
the Fat Channel, allowing you to add dynamics processing and EQ.

Содержание STUDIOLIVE 24.4.2









































































































































































































Отзывы:

Нет отзывов