8.3 Configuring MIDI Devices
90
Power User Tip:
In the Send To drop-down menu, select the MIDI interface output from which your Stu-
dio One will send MIDI data to your keyboard. If your keyboard controller doesn’t need to receive MIDI
data from Studio One, you can leave this unselected.
用户提示：在
"
发送到
"
下拉菜单中，选择
MIDI
接口输出，
Studio One
将从该接口向你的键盘发送
MIDI
数据。如
果你的键盘控制器不需要从
Studio One
接收
MIDI
数据，你可以不加选择。
You must specify which MIDI channels will be used to communicate with this keyboard. For most pur-
poses, you should select all MIDI channels. If you are unsure of which MIDI channels to choose,
select all 16.
Studio One allows you to filter out specific control functions. If you would like Studio One to ignore
Aftertouch, Pitch Bend, Program Change, or all CC messages, enable filtering for any or all of these
messages.
In the Receive From drop-down menu, select the MIDI interface input from which Studio One Prime
will receive MIDI data (that is, the MIDI port to which your keyboard is connected).
If this is the only keyboard that you will use to control your external synthesizers and virtual instru-
ments, you should check the box next to Default Instrument Input. This will automatically assign your
keyboard to control all MIDI devices in Studio One Prime.
Click “OK.” You're all set up!
你必须指定哪些
MIDI
通道将被用于与该键盘通信。对于大多数情况，你应该选择所有的
MIDI
通道。如
果你不确定要选择哪些
MIDI
通道，请选择全部
16
个。
Studio One
允许你过滤掉特定的控制功能。如果你想让
Studio One
忽略
Aftertouch
、
Pitch Bend
、
Program Change
或所有
CC
信息，请启用任何或所有这些信息的过滤功能。
在
Receive From
下拉菜单中，选择
Studio One Prime
接收
MIDI
数据的
MIDI
接口输入（也就是你的键盘
所连接的
MIDI
端口）。
如果这是你用来控制外部合成器和虚拟乐器的唯一键盘，你应该选中默认乐器输入旁边的方框。这将自
动分配你的键盘来控制
Studio One Prime
中的所有
MIDI
设备。
点击
"
确定
"
。你就全部设置好了
!
If you have a sound module that you’d like to connect, leave the External Devices window open and pro-
ceed to the next part of this section. If not, you can close the window and skip to the next section.
如果你有一个你想连接的声音模块，让
"
外部设备
"
窗口打开，然后进入本节的下一部分。如果没有，你可
以关闭该窗口并跳到下一节。
