17
4
3.2
UC Surface Control Software
Usinga Quantum 2626 Interfacewith Popular Audio Applications
Quantum 2626
Owner’sManual
4
UC Surface Control Software UC
表面控制软件
UC Surface is a powerful control software for your Quantum 2626 interface.
These control functions are completely integrated inside Studio One. UC Surface
allows users of other popular DAW applications to access these functions.
UC Surface is designed to verify that your Quantum 2626 interface has the
correct firmware version installed. You will be prompted
if your Quantum 2626 interface needs its firmware updated. Click on the Update
Firmware button to begin the update.
UC Surface
是一个强大的控制软件，用于
Quantum 2626
接口。这些控制功
能完全集成在
Studio One
里面。
UC Surface
软件允许其他热门的
DAW
应用
程序的用户访问这些功能。
使用
UC Surface
软件可以验证你的
Quantum 2626
接口，是否安装了正确的
固件版本。如果你的
Quantum 2626
接口需要更新其固件，会提示你。点
击
” Update Firmware”
按钮，开始固件更新。
Warning:
Do not power off or disconnect your Quantum 2626 interface
during the firmware update. Once the firmware update is successfully
completed,youwill be alerted andinstructed to disconnect yourpowersupplyand
Thunderbolt cable and reconnect it before rebooting your device.
Itisnot sufficient
to simply power down your unit, you must disconnect the power source.
警告：
在固件更新期间，不要关闭或断开
Quantum 2626
接口的电源。一旦
固件更新成功，会指示你断开电源和
Thunderbolt
电缆，在重新启动你的设
备前，重新连接它。
仅仅关闭设备的电源是不够的，你必须断开电源的连
接。
When the firmware update is complete, you must disconnect the
physical power source from your Quantum 2626 interface and
reconnect it. Powering it off it will not complete the update process.
当固件更新完成后，你必须断开
Quantum 2626
接口的物理电源，
并重新连接。电源关闭将不会完成更新过程。
