20
5
OUTPUT SECTION
Output Level (fader)
– Adjusts the output
level of the mixer.
Global Solo Clear
– Clears (ON) or restores
(off) solo’s that have been selected in input
channels.
Global Mute Clear
– Clears (ON) or restores
(off) mute’s that have been selected in input
channels.
Playback to Phones
– selects the audio
stream output coming from your software.
Mix to Phones
– Pressing this button sends
the Mixer’s zero latency output to the head-
phones.
Mixer Output
– sends the output of the mixer
to the selected pair of outputs on the
EASERA GATEWAY.
Save
– enables you to save your mixer
setups.
Load
– loads your mixer setups. (note that
you must first save a mixer setup before you
load o
2.1 COMPUTER REQUIREMENTS
Below are the minimum computer system requirements for your EASERA GATEWAY.
Windows
- OS: Microsoft Windows XP
- Computer: Windows compatible computer with FireWire port.
- CPU/Clock: Pentium, Celeron with 900Mhz or higher (Dual 1.2 GHz recommended)
- Memory(RAM): 256 MB (512MB recommended)
Macintosh
- OS: MacOS X 10.3.7 or later
- Computer: Apple Macintosh series with on-board Firewire port.
- CPU/Clock: PowerPC G4/800Mhz or higher (G4/Dual 1 GHZ recommended)
- Memory(RAM): 512 MB or more
Note that the speed of your processor, amount of RAM and size and speed of your hard
drive will greatly affect the overall performance of your recording system. Also, a more
powerful system (faster processor with more RAM) will allow for lower latency (signal
delay) than you might experience while monitoring audio or MIDI signals.
MIXER
2 INSTALLATION AND SETUP
