12
internal loudspeaker [or external optional loudspeaker connected to jack
EXT.SP (
C
)].
“AM”
blinks on the LCD.
OF
: The reception is no more functional. Only the
modulation of the micro-
phone
is transmitted to the Public Address loudspeaker connected to jack
PA.SP. (
D
).
PA
and
PA
volume level are displayed.
PA
: the
modulation of the microphone
and the
received signal
are transmit-
ted to the Public Address loudspeaker connected to jack PA.SP. (
D
). The
used modulation mode
“AM”
blinks on the LCD.
The
VOL
knob (
1
) allows adjust
PA
volume.
Default PA setting is:
In
.
See §
CB/PA (Public Address)
page 8.
10) MIC TYPE
The PRESIDENT TAYLOR FCC 12/24 V can be used with an electret micro-
phone as well as with the dynamic one, 6-pin PRESIDENT
(see the cabling
diagram page 55)
. Turning on the unit, the type of the microphone is
briefly displayed.
Press the
F
key (
9
) to
enter
MENU
. is displayed.
1.
Turn the rotary
CH
knob (
3
) or use
UP
/
DN
keys (
14
) on the microphone to
select
the
MICTP
function.
2.
Press the
F
key (
9
) to
validate.
The current parameter blinks on LCD.
3.
Turn the rotary
CH
knob (
3
) or use
UP
/
DN
keys (
14
) on the microphone to
select
the type on the microphone
EL
(electret) or
DY
(dynamic).
4.
New press on the
F
key (
9
) to
validate
. The parameter stops blinking.
a
)
Go to point
1
to
adjust
another function or
b
) Press the
PTT
switch (
13
) to
validate
and
exit
MENU
. disappears.
5.
If no key is pressed, the unit
exits
MENU
after 10 seconds, disappears from
the display.
Default type of microphone is
EL
(electret)
.
11) RESET
Restores all factory settings.
Press the
F
key (
9
) to
enter
MENU
. is displayed.
1.
Turn the rotary
CH
knob (
3
) or use
UP
/
DN
keys (
14
) on the microphone to
select
the
RESET
function.
2.
Press the
F
key (
9
) to
validate.
AL
blinks on LCD.
3.
New press on the
F
key (
9
) to
reset
. The unit
exits
MENU
. disappears.
4.
If no key is pressed, the unit
exits
MENU
after 10 seconds. disappears
D) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
: 40
- Modulation modes
: AM
- Frequency range
: from 26.965 MHz to 27.405 MHz
- Weather channels
: from162.400 MHz to 162.550 MHz
- Antenna impedance
: 50 ohms
- Power supply
: 13.8 V / 27.6 V
- Dimensions
: 5.905 (W) x 6.496 (D) x 1.771 (H) inches
150 (W) x 165 (D) x 45 (H) mm
- Weight
: ± 1.653 lbs / 0.750 kg
- Accessories supplied
: 1 microphone electret UP/DOWN with
support, mounting cradle, screws and
fused power cord.
2) TRANSMISSION
- Frequency allowance
: +/- 200 Hz
- Carrier power
: 4 W
- Transmission interference
: inferior to 4 nW (- 54 dBm)
- Audio response
: 300 Hz to 3 KHz
- Emitted power in the adj. channel : inferior to 20 µW
- Microphone sensitivity
: 3.0 mV
- Drain
: < 2 A @ 13.8 V / <1.5 A @ 27.6 V
- Modulated signal distortion
: 2 %
3) RECEPTION
- Maxi. sensitivity at 20 dB sinad
: 0.5 µV - 113 dBm
- Frequency response
: 300 Hz to 3 kHz
- Adjacent channel selectivity
: 60 dB
- Maximum audio power
: 3 W
- Squelch sensitivity
: minimum 0.2 µV - 120 dBm
: maximum 1 mV - 47 dBm
- Frequency image rejection rate
: 60 dB
- Intermediate frequency rej. rate
: 70 dB
- Drain
: 150 ~ 500 mA (13.8 V)
100 ~ 300 mA (27.6 V)
English
Содержание Taylor FCC
Страница 1: ...Owner s manual Manual del usuario Manuel d utilisation Manual do usuário 12 24 V ...
Страница 58: ...58 ...
Страница 59: ...59 ...